فهرست:
ندارد
منبع:
1[ دستورالعمل بهسازی لرزهای ساختمانهای موجود - نشریه 360. ( 1385). تهران.
[2]. Soong, T.T. (1997). “Passive Energy Disssipation System in Structural Engineering.” John Wiley & Sons, Inc.
[3]. Uang, C.M., and Nakashima, M. (2003). “Steel Buckling-Restrained Frames in Earthquake Engineering: Recent Advanced and Applications.” Chapter 16, Y. Bozorgnia and V.V. Bertero, Eds. CRC Press. Publication.
[4]. Bertero, V.V., and Vany, C.M., (1992). “Issues and Futore Directions in the Use of an Energy Approach for Seismic-Resistant Design of Structures.” P.Fajfar and H.Krawinkler Editors, Elsevier Applied Science, pp.3-22.
[5]. Wakabayashi, M., (1994). “Design of Earthquake-Resistant Building.” New York: McGraw Hill, Inc.
] 6[ عادلی، حجتاله ( 1376). سازههای ساختمان بلند. چاپ پنجم. تهران: انتشارات کتابفروشی دهخدا.
] 7[ شاکری، کاظم، ( 1379). "بررسی رفتار لرزهای بادبندهای زانویی"، پایان نامه کارشناسی ارشد زلزله، تهران: دانشگاه علم و صنعت ایران.
] 8[ ناطقالهی، فریبرز و اکبرزادگان، حسین ( 1375). رفتار و طراحی لرزهای قابهای خارج از محور. چاپ اول. تهران: موسسه بینالمللی زلزلهشناسی و مهندسی زلزله.
[9]. Fujimoto, M. (1988). “A Study on Brace Enclosed in Buckling-Restrained Mortar and Steel Tube: Part 1 and 2.” Structural Engineering Section, pp. 1339-1342.
[10]. Nagao, N. and Takahashi, S. (1990). “A Study on the Elasto-Plastic Behavior of Unbonded Composite Bracing (Part 1: Experiments on Isolated Members Under Cyclic Loading).” Journal of Structural Engineering, vol. 415, pp. 105–115.
[11]. Inoue, K. Sawaizumi, S. and Higashibata, Y. (1992). “Bracing Design Criteria of the Reinforced Concrete Panel Including Unbonded Steel Diagonal Braces.” Journal of Structural and Construction Engineering, vol. 1, pp. 41–49.
[12]. Horie, T. and Yabe, Y. (1993). “Elasto-Plastic Behavior of Steel Brace with Restraint System for Post Buckling.” Annual technical papers of steel structures, vol. 1, pp. 187–194.
[13]. Suzuki, N. Kono, R. Higashibata, Y. Sasaki, T. and Segawa, T. (1994). “Experimental Study on the H-Section Steel Brace Encased in RC or Steel Tube.” Summaries of Technical Papers of Annual Meeting, pp. 1621-1622.
[14]. Tada, M. and Kuwahara, S. (1993). “Horizontally Loading Test of the Steel Frame Braced with Double-Tube Members.” Annual technical papers of steel structures, vol. 1, pp. 203–208.
[15]. Shimizu, T. Fujisawa, K. Uemura, K. and Inoue, K. (1997). “Design Method to Prevent Buckling of Low Yield Strength Steel Tube Brace and Fracturing of Joints: Part 1 and 2.” Summaries of Technical Papers of Annual Meeting, pp. 781-784.
[16]. Sridhara, B.N. (1990). “Sleeved Column-as a Basic Compression Member.” Procced of the 4th International Conference on Steel Structures & Space Frames, pp. 181–188.
[17]. Iwata, M. Katoh, T. and Wada, A. (2001). “Performance Evaluation of Buckling-Restrained Braces on Damage Controlled Structures: Part 1 and 2.” Summaries of Technical Papers of Annual Meeting, pp. 659-662.
[18]. Sabelli, R. Mahin, S. and Chang, C. (2003). “Seismic Demand on Steel Braced Frame Building with Buckling-Restrained Braces.” Journal of Engineering Structures, Vol. 25, pp. 655-666.
[19]. Yamaguchi, M. Yamada, Y. Matsumoto, Y. and Takeuchi, T. (2002). “Full-Scale Shaking Table Test of Damage Tolerant Structure With a Buckling Resistant Brace.” Journal of Structural and Construction Engineering, vol. 558, pp. 189-196.
[20]. Ochoa Escudero, E. and Nakashima, M. (2003). “Comparative Parametric Study on Normal and Buckling-Restrained Steel Braces”. Universita degli studi di Pavia.
[21].Dasse Design INC. (2009). Cost Advantages of Buckling Restrained Braced Frame Building, San Francisco.
[22]. AISI (1996). “Specification for the Design of Cold-Formed Steel Structural Members.” D.C: American Iron and Steel Institute, Washington.
[23]. Yu, W.W. (2000). Cold-Formed Steel Structures. John Wiley & Sons, Inc.
[24]. FEMA 450 (2004). NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures Part1: Provisions, Prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency, Washington.
[25]. Sridhara, B.N. (1990). “Design of Optimum Weight Compression Members.” International Conference on Steel and Aluminium Structures, pp. 195–206, Singapore.
[26]. Schafer, B.W., Ádány, S. (2006). “Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods.” 18th International Specialy Conference on Cold-Formed Steel Structures, Orlando, FL.
[27]. FEMA 369 (2004). Primere for Design Professionals: Communicating with Owners and Managers of New Buildings on Earthquake Risk, Washington.
[28]. SEAOC, 1999, Recommended Lateral Force Requirements and Commentary, prepared by the Structural Engineers Association of California, published by the International Conference of Building Officials, Whittier, California.